Question: Could you please explain the basic operation procedure of the ESTUN E21 press brake controller?
Answer: Certainly! The ESTUN E21 press brake controller has a straightforward operation procedure. Here are the basic steps:
- Power On: Ensure the press brake controller is properly connected to the power supply and switch it on.
- Select Mode: The E21 controller offers several modes, such as manual mode and automatic mode. Select the desired mode based on your requirements.
- Set Parameters: Enter the necessary parameters for your bending operation. These parameters include material thickness, bending angle, and back gauge position.
- Manual Mode Operation: If you choose the manual mode, you can control the press brake manually using the control buttons. Use the foot pedal or the control panel to adjust the position of the press brake and perform the bending operation.
- Automatic Mode Operation: In automatic mode, the press brake controller utilizes pre-programmed bending sequences. Load the corresponding program for your specific bending task, and the controller will execute the bending process automatically.
- Fine-Tuning: The E21 controller allows you to adjust and fine-tune various parameters during the bending process. This includes modifying the back gauge position, bending speed, and angles if needed.
- Safety Measures: Always prioritize safety when operating the press brake. Ensure that the workpiece is properly secured, and operators follow all safety guidelines and precautions.
Remember, this is a basic overview of the ESTUN E21 press brake controller’s operation procedure. For detailed instructions, consult the user manual provided by the manufacturer or seek guidance from an expert.
